Braided Metal Hose

316 L SS Annular Corrugated High Pressure Hose

  • Construction: A-240 316L Stainless Steel Butt Welded Tube, Annular Close Pitch Corrugations , T304 Stainless Steel Braid. Pressure up to 8,000 PSI, depending on size.
  • Pressure up to 3300 PSI, depending on size.
  • Temperature: Cryogenic to +1500° F.
  • Sizes: 0.25″ I.D to 12.00″ I.D

Medium Pressure SS Annular Corrugated Hose

  • Construction: 321, 316L or 304 Stainless Steel Butt Welded Tube, Annular Close Pitch Corrugations, 304 Stainless Steel Braid.
  • Pressure up to 3300 PSI, depending on size.
  • Temperature: Cryogenic to +1500° F.
  • Sizes: 0.25″ I.D to 12.00″ I.D

Super Flex SS Braided Hose

  • Construction: Annular Butt Welded Hydro Formed Closed Pitched Hose.
  • Extremely flexible- ISO 10380 conformance, 50,000 cycle rated and pressure rated per ISO 10380.
  • Hose 321 and 316 L SS , Braid 304 SS .
  • Pressure ratings up to 4800 PSI.
  • Temperature: Cryogenic to +1500° F
  • Sizes: .250″ I.D to 6.00″ I.D

Fully Compressed Metal Hose 321 SS

  • Recommended for high temperature and extreme vibration.
  • Pressure ratings up to 1100 PSI.
  • Temperature: Cryogenic to +1500° F
  • Sizes: .750″ I.D to 4.00″ I.D

Interlock Metal Hose

  • Packed or Unpacked Stainless Steel Unlined Hose available in a variety of metal thicknesses from .010 to .030. Used for longevity and corrosive atmospheres.
  • Applications: Exhaust, Conduit, Dry Bulk Product Transfer.
  • Standard length is 25 ft.
  • Temperature -60°F to +1500°F.
  • Sizes: .750″ I.D to 16.00″ I.D

Special Fabricated Assemblies

 

Liner_ASM.5

Lined Assembly

  • Detroit Flex Defense (DFD) can line metal hoses with a stainless steel interlock flexible metal tube. This will eliminate premature failure when the product being conveyed is at such a high velocity that it can cause resonant vibration within the hose causing it to prematurely fail.
Guarded AssemblyASM.1

Guarded Assembly

  • Detroit Flex Defense (DFD) can attach stainless steel interlock flexible metal tubing to protect the outer braid of our metal hose assemblies. This will prevent premature failure from damage to rough handling, abrasion, or extreme flexing.
Jacketed_ASM.3

Jacketed Assembly

  • Jacketed assemblies are used as a heated transfer line for those products which must be maintained at an elevated temperature in order to flow easily. Steam or hot oil is circulated through the jacket and heats the product being conveyed in the core hose.
procedures_blank_1

Traced Assembly

  • Traced hose assemblies are used when the product being transferred must be heated in order to flow easily. Steam or hot oil is circulated through the inner hose and heats the product in order to maintain the desired flow rate.