Heated Hose

Low Pressure Smooth Bore PTFE Hose

  • General purpose Smooth Bore PTFE hose meets or exceeds SAE 100R14 specifications.
  • Service to -100°F to 400°F
  • Operating pressure up to 3,000 PSI.
  • Sizes: -03 to -24Z

High Pressure Smooth Bore PTFE Hose

  • Overall strength and reliability, flexible, lightweight design, conductive 0.040″ wall PTFE Inner core for Static Dissipation, exceptional margin of safety.
  • Operating pressure at 400°F is 3,000 PSI for all sizes.
  • Sizes: -04 to -24

Ultra High Pressure PTFE Hose

  • Rugged construction and high performance, ideal for high vibration applications, conductive 0.040″ wall PTFE Inner core for static dissipation, performs well in high shock applications.
  • High-pressure applications up to 400ºF . Maximum operating pressure for all sizes is 6,000 PSI.
  • Sizes: -4 to -12

Stainless Steel Braided Corrugated Metal Hose

  • High Temperature to 750 °F, flexible design, high-density thermal insulation, exceptional margin of safety .
  • Sizes: ¼” I.D to 6″ I.D

Water Hose

  • Our Heated Water Hose is manufactured from only the highest quality industrial materials. Our hoses come with a standard one year manufacturer’s warranty and are guaranteed to temperatures of -25°F.
  • FDA – material complies with 21 CFR 177.1520 (c) 3.1 (b) , NSF – hose is listed under Standard 51 (plastics, materials, and components used in food equipment) for contact up to 125°F and under NSF-61 for transfer of drinking water up to a temperature of 87°F. Hose contains no substances designed as hazardous under California Proposition 65.
  • Temperatures from -25°F to 125°F , Max Working Pressure at 70°F is 200 PSI, Max Working Pressure at 122°F is 100 PSI., Operates on 120VAC , Does not require a thermostat or temperature controller, Will not overheat or burnout , Draws 1.5A per 25 foot hose length , Power output is self-regulated in response to the hose temperature.
  • All Stainless Steel Garden Hose Fittings are Dry Film Lubed for easier installation.
  • Size: 3/4″ ID

Heated Filter

  • The hardened outer cover insures that your filter assembly is able to withstand the everyday stresses and damaging effects of a modern and busy emissions environment.
  • Standard voltages are 110 VAC,, 220 VAC, and 24 VDC.
  • Sizes: Call for sizing

Heated Manifold’s & Valves

  • Custom manufactured to your specifications. Single to eight zone models available.
  • Sizes: Call for sizing

Silicone Rubber Drum Heaters

  • The drum heater heating element utilizes a multiple strand, fine gauge Nickel alloy wire for maximum flexing resistance and efficient heat dissipation. It is enclosed in a two ply combination of silicone rubber impregnated fiberglass fabric which yields excellent moisture and chemical resistance.
  • The unique attaching method effectively maintains the heater in close contact with the drum for quick heat transfer while allowing for variations in drum diameter.
  • A silicone covered power cord insures maximum strain relief and maintains the moisture barrier at the cord/heater junction. 120 volt units are furnished with a 3-prong parallel blade plug. 240 volt units are furnished with a 3-prong tandem blade (NEMA 6-15P) plug.
  • Sizes: 5 Gal. (300W) to 55 Gal. (1800W)

Temperature Controllers

  • Custom manufactured temperature controllers are available for any application that requires tightly controlled or monitored temperatures. We offer standard configurations able to control loads up to 3000 watts, and utilizing either Type J thermocouples or RTD sensors. Temperature Controllers that can handle higher wattage loads or different sensor types are also available. We can provide a Temperature Controller for any application you may have.

  • Sizes: Call for sizing

Fiberglass Blanket Heaters

  • Heating Element is a fine gauge, multiple stranded, stress relieved wire insulated with fiberglass yarn and secured to the heating face. Element construction of up to 150 feet of stranded wire per square foot of surface eliminates hot spots and insures fast heat up time and long service life. Heating Face and Cover are fiberglass fabric woven of “itch-proof” Beta glass high temperature yarns. Thermal Insulation is a fiberglass felted wool. One inch thick is standard. Seam Closure provided by nickel plated lacing hoods is standard. Eyelets, Velcro ™ tape, and lacing ties are also available. Power Leadwires are a high temperature fiberglass insulated nickel plated copper.
  • Temperature ratings 750°F maximum
  • Sizes: Call for sizing